The extruder with preconditioner is designed for production of:

  • mixed sub humid feed in pellet form for livestock, domestic animals, pets, predators, poultry and fish, shrimps and crustaceans



dry steaming of raw material:

  • increases the capacity,
  • improves the form and quality of granular products,
  • reduces the wear of working parts of extruder



meat and bone meal, blood meal, fish or shrimp meal, feed yeast, sunflower, flax seed, peanut, pea, corn, wheat, rice flour and grape husks

  • Parameter Value
  • Capacity, kg/hour: 200
  • Steam consumption per 1 kg of feed, kg: 0,03-0,05
  • The vapor pressure supplied to the extruder, MPa (kg/cm²): 0,3 – 0,6 (3–6)
  • Steam temperature K (°C): 120-140 (393 – 443)
  • Length, mm: 3234
  • Width, mm: 1960
  • Height, mm: 3029
  • Power, kW: 50
  • Weight, kg: 1800

Raw material is supplied into hopper and preconditioner of extruder.

The preconditioner is a component that pre-heats, moistures and at the same time mixes and injects hot steam into raw material. Dry steam pressure is 0.2-0.5 MPa and temperature - 110-130 °C. The raw material is softened and heated to 65-75 °C.

Preconditioning  increases the production capacity of extruder, improves the quality of raw material and reduces the wear of the working parts over 20%.

Extrusion is a process of thermal treatment, sterilization, dehydration, texturing and granulating of the final product.

Raw material is heated by steam during a short-term (4-6 sec.) and pressed to 30 atmospheres. During the time of thermal process (which is less than 6 seconds) the protein and lysine content is not reduced.

Moisture is vaporized and starch cells are ruptured and availability of carbohydrates action of digestive enzymes is increased. In the process of extrusion the amount of protein increases.

The output of finished product increased by 3.4% compared to dry extrusion. After extrusion with preconditioning, for example full-fat soya does not require any drying.

Short but intensive heat, moisture and pressure is an effective way to destroy salmonella and other pathogenic bacteria, fungi and mould.

Nutrients become easy digestible which is mainly important for predatory fish species. Enzyme inhibitors are inactivated and toxins are neutralized which is highly important for any fish feed.