VACUUM COATER
for application of up to 30% of FAT, LIQUID and DRY ADDITIVES with the uniform pellet coating
We offer:
VACUUM COATER VC-1000 with production capacity of 1000 kg per hour
VACUUM COATER VC-2000 with production capacity of 2000 kg per hour
THE FINAL PRODUCT:
aquafeed or petfood pellet (with fat content of 15...35%)
BENEFITS OF VACUUM COATER
The extruded pellets have a very porous inner structure. It is within the pores of this internal structure that added liquid is retained. The objective of vacuum coating is to use a pressure differential to force liquids through the outer layer and deeply into the porous area of the pellet
- high levels of fat addition
- up to 3 different liquids and 1 dry additive
- uniform degree of absorption and penetration of fat inside the pellets
If there are any questions? OUR CONTACTS
- Parameter Value
- Capacity, kg/hour: 1000 | 2000
- Bulk weight of raw materials, t/m³: 0,5
- Total / operating volume of the container, l: 450 / 300
- Air pressure (in control devices), bar: 4...6
- Air consumption, l /min: 150 | 200
- Dosing of liquid additives,%: 5 ... 15
- Length, mm: 1855
- Width, mm: 2500
- Height, mm: 4200
- Power, kW: 6,5 | 9,0
- Weight, kg: 2500 | 3250
OPERATIONAL FLOW:
- Measuring the weight of the empty volume of the coater
- Filling the volume with dry pellets
- Mixing pellets inside the coater
- Measurement of the weight of the filled coater
- Pumping out air from the coater
- Fat application
- Equalization of pressure inside the coater
- Application of liquid / hydrated additives
- Application of dry additives
- Unloading the pellets
